Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Mar 2019
    Posts
    2

    Resistance Issue M5

    Bought this thing M5 second hand, initially partial key pad functions were not working, replaced the keypad now all buttons get a response but the resistance level button gets a response but no change in resistance, when a program is started and machine put in play and the resistance button pushed up the console resets. Bought a new console (ouch) same issue (ouch x 2), the servo gear looks proper and magnet looks right for level one, just on edge of disc. Any ideas on what the problem is? Looking to call the tech again and def return console.

  2. #2
    Junior Member
    Join Date
    Mar 2019
    Posts
    2
    Ok so I’m mechanically inclined so I took off cover again on wheel and figured even though the techs said these servo motors rarely go bad I figured let me unplug it before I start stripping the wiring harnesses for inspection. And well the console works perfect without the servo plugged into it from the bottom. Now have to wait on new servo to confirm.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •